Schneider Altistart ATS22 ATS22C48Q Soft Starters ATS22C48Q Softstarters In Stock

ATS22C48Q  Soft starter-ATS22-control 220V-power 230V(132kW)/400...440V(250kW)

 

 

Technical Specification of Schneider Altistart ATS22 ATS22C48Q Soft Starters ATS22C48Q Softstarters In Stock
 

range of product Altistart 22

product or component type Soft starter

product destination Asynchronous motors

product specific application Pumps and fans

component name ATS22

network number of phases 3 phases

[Us] rated supply voltage

230...440 V - 15...10 %

motor power kW

132 kW 230 V

250 kW 400 V

250 kW 440 V

factory setting current 437 A

power dissipation in W

218 W for standard applications

utilisation category AC-53A

type of start Start with torque control (current limited to 3.5 In)

IcL starter rating

480 A for connection in the motor supply line for standard applications

IP degree of protection IP00

 

 

Complementary of Schneider Altistart ATS22 ATS22C48Q Soft Starters ATS22C48Q Softstarters In Stock
 

assembly style With heat sink

function available Internal bypass

supply voltage limits 195…484 V

supply frequency 50...60 Hz - 10...10 %

network frequency 45...66 Hz

device connection In the motor supply line

                        To the motor delta terminals

[Uc] control circuit voltage 230 V - 15...10 % 50/60 Hz

control circuit consumption 20 W

discrete output number 2

discrete output type

Relay outputs R1 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O

Relay outputs R2 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O

minimum switching current

100 mA at 12 V DC (relay outputs)

maximum switching current

5 A 250 V AC resistive 1 relay outputs

5 A 30 V DC resistive 1 relay outputs

2 A 250 V AC inductive 0.4 20 ms relay outputs

2 A 30 V DC inductive 7 ms relay outputs

discrete input number 3

discrete input type (LI1, LI2, LI3) logic, 5 mA 4.3 kOhm

discrete input voltage 24 V <= 30 V

discrete input logic

Positive logic LI1, LI2, LI3 at State 0: < 5 V and <= 2 mA at State 1: > 11 V, >= 5 mA

output current 0.4...1 Icl adjustable

PTC probe input 750 Ohm

communication port protocol Modbus

connector type 1 RJ45 

communication data link Serial

physical interface RS485 multidrop

transmission rate 4800, 9600 or 19200 bps

installed device 31

protection type

Phase failure: line

Thermal protection: motor

Thermal protection: starter

marking CE

type of cooling Forced convection

operating position Vertical +/- 10 degree

height 455 mm

width 304 mm

depth 339.7 mm

net weight 50 kg

Motor power range AC-3

110…220 kW at 200…240 V 3 phases

250…500 kW at 380…440 V 3 phases

motor starter type Soft starter

 

 

Environment of Schneider Altistart ATS22 ATS22C48Q Soft Starters ATS22C48Q Softstarters In Stock
 

electromagnetic compatibility

Conducted and radiated emissions level A conforming to IEC 60947-4-2

Damped oscillating waves level 3 conforming to IEC 61000-4-12

Electrostatic discharge level 3 conforming to IEC 61000-4-2

Immunity to electrical transients level 4 conforming to IEC 61000-4-4

Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3

Voltage/current impulse level 3 conforming to IEC 61000-4-5

standards

EN/IEC 60947-4-2

product certifications

GOST

CSA

UL

C-Tick

CCC

vibration resistance

1 gn (f= 13…200 Hz) conforming to EN/IEC 60068-2-6

1.5 mm (f= 2…13 Hz) conforming to EN/IEC 60068-2-6

shock resistance

15 gn for 11 ms conforming to EN/IEC 60068-2-27

noise level

56 dB

pollution degree

Level 2 conforming to IEC 60664-1

relative humidity

0…95 % without condensation or dripping water conforming to EN/IEC 60068-2-3

ambient air temperature for operation

-10…40 °C (without derating)

40…60 °C (with current derating 2.2 % per °C)

ambient air temperature for storage

-25…70 °C

operating altitude

<= 1000 m without derating

> 1000...< 2000 m with current derating of 2.2 % per additional 100 m

 

 

Packing Units of Schneider Altistart ATS22 ATS22C48Q Soft Starters ATS22C48Q Softstarters In Stock
 

Package 1 Weight

40.000 kg

Package 1 Height

5.450 dm

Package 1 width

4.000 dm

Package 1 Length

5.750 dm

 

 

Offer Sustainability of Schneider Altistart ATS22 ATS22C48Q Soft Starters ATS22C48Q Softstarters In Stock
 

Sustainable offer status

Green Premium product

REACh Regulation

REACh Declaration

EU RoHS Directive

Pro-active compliance (Product out of EU RoHS legal scope)

EU RoHS Declaration

Mercury free

Yes

RoHS exemption information

Yes

China RoHS Regulation

China RoHS declaration

Environmental Disclosure

Product Environmental Profile

Circularity Profile

End of Life Information

WEEE

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins